CHASSIS 5-39
• Remove the swingarm bearings using the special tools.
%
1 09923-74510: Bearing remover
2 09923-73210: Bearing remover
3 09930-30102: Sliding shaft
$
SWINGARM
Inspect the swingarm for damage.
CUSHION LEVER BEARINGS
Insert the spacers into bearings, check the play by moving the
spacers up and down.
If excessive play is noted, replace the bearing with a new one.
• Remove the cushion lever bearings using the special tools.
%
1 09923-73210: Bearing remover
2 09930-30102: Sliding shaft
3 09913-70210: Bearing installer set
The removed needle bearings should be replaced with
new ones.
To Next Page
Loading...
