ELECTRICAL SYSTEM 6-13
REMOVAL AND DISASSEMBLY
• Disconnect the battery
- lead wire. (!6-11)
• Remove the engine sprocket cover
1.
• Disconnect the generator lead wire
2 and coupler
3.
• Remove the generator.
• Hold the generator driven gear using a vise
4 and two pieces
of wood
5 as shown. Then, remove the generator driven gear
nut.
#
• Remove the damper housing
6 using the special tool.
" 09913-61510: Bearing remover
• Remove the generator end cover
7.
Do not hold the damper housing
6 using the vise or
the damper housing will be damaged.
To Next Page
Loading...
