Suzuki GSF650S - Handlebar Height Adjustment

CHASSIS 5-75
• Install the dampers.
NOTE:
Dampers are used in two ways. Pay attention to the direction of
dampers when installing them.

A: For low (normal) position

B: For high position
$
HANDLEBAR HEIGHT ADJUSTMENT
• Remove the cable guides. (GSF650S)
• Remove the handlebar holder nuts and handlebar spacers

1.
• Dismount the handlebars.
NOTE:
Place a rag on the fuel tank to prevent the fuel tank scratched.
• Insert the spacers between the steering upper bracket and
handlebar holders.
• Tighten the handlebar holder nuts to the specified torque.
# Handlebar holder nut: 45 N·m (4.5 kgf-m)
• Install the cable guides. (GSF650S)
S)
)
Position of bracket

1,

2 and direction of dampers
must be unified either

A or

B.
Operation with an improperly adjusted handlebars or
incorrectly routed cables could result in an unsafe
riding condition.