2-20 PERIODIC MAINTENANCE
CHASSIS BOLTS AND NUTS
Check that all chassis bolts and nuts are tightened to their specified torque. (Refer to page 2-21 for the loca-
tions of the following nuts and bolts.)
Tighten initially at 1 000 km (2 month) and every 6 000
km (24 months) thereafter.
ITEM N·m kgf-m
1 Steering stem head nut 65 6.5
2 Front fork upper clamp bolt 23 2.3
3 Front fork lower clamp bolt 23 2.3
4 Front fork cap bolt 23 2.3
5 Front axle 65 6.5
6 Front axle pinch bolt 23 2.3
7 Handlebar holder bolt 23 2.3
8 Front brake master cylinder mounting bolt 10 1.0
9 Front brake caliper mounting bolt 39 3.9
0 Brake hose union bolt (front & rear) 23 2.3
A Air bleeder valve (front & rear) 8 0.8
B Brake disc bolt (front & rear) 23 2.3
C Rear brake caliper mounting bolt 26 2.6
D Rear brake caliper housing bolt 37 3.7
E Rear brake master cylinder mounting bolt 25 2.5
F Rear brake master cylinder push rod locknut 18 1.8
G Front footrest bolt 35 3.5
H Front footrest bracket bolt 23 2.3
I Swingarm pivot nut 100 10.0
J Rear shock absorber mounting nut (upper & lower) 50 5.0
K Cushion lever mounting nut 78 7.8
L Cushion lever rod mounting nut 78 7.8
M Rear axle nut 100 10.0
N Rear sprocket nut 50 5.0
To Next Page
Loading...
