6-44 ELECTRICAL SYSTEM
Bulb replacement
• Remove the combination meter unit. (!5-5)
• Remove the position light sockets
1.
• Disconnect the headlight (Low) coupler
2 and remove the
rubber boot
3.
• Remove the headlight bulb (Low)
4 by unhooking the bulb
holder spring
5.
#
• Remove the headlight bulb (Hi) in the same way from under
the cowling.
• Reassemble the bulbs in the reverse order of removal.
If you touch the bulb with your bare hands, clean the
bulb with a cloth moistened with alcohol or soapy
water to prevent premature bulb failure.
To Next Page
Loading...
