1D-54 Engine Mechanical:
2) Remove the oil jet (2) (for transmission) from the
lower crankcase.
Oil Gallery Plug
1) Remove the oil gallery plug (1) from the lower
crankcase.
2) Remove the oil gallery plugs (2) and (3) from the
lower crankcase.
Water Jacket Plug
Remove the water jacket plugs (1) from the upper
crankcase.
Oil seal / Bearing
Remove the oil seal and bearings if necessary. Refer to
“Transmission Removal in Section 5B (Page 5B-3)”.
Engine Bottom Side Assembly
B837H11406036
Assemble the engine bottom side in the reverse order of
disassembly. Pay attention to the following points:
NOTE
Apply engine oil to each running and sliding
part before reassembling.
Oil Seal / Bearing
• Install the oil seal and bearings. Refer to
“Transmission Installation in Section 5B (Page 5B-5)”.
2
I837H1140115-03
1
I837H1140116-01
2
I837H1140117-01
3
I837H1140118-01
1
1
I837H1140119-01
I837H1140120-01
I837H1140121-01
To Next Page
Loading...
General
