9C-1 Combination Meter / Fuel Meter / Horn:
Body and Acc essories
Combination Meter / Fuel Meter / Horn
General Description
Combination Meter System Description
B837H19301001
This combination meter mainly consists of the stepping motor, LCD (Liquid Crystal Display) and LED (Light Emitting
Diode).
The rpm pointer is driven by the stepping motor.
The LCDs indicate Speed, Odo / Trip 1 / Trip 2 / Fuel reserve’s trip / Clock / FI (DTC), Gear position, Engine revolution
indicator and Fuel level indicator respectively.
LED (Light Emitting Diode)
LED is used for the illumination light and each indicator light.
LED is maintenance free. LED is less power consuming and more resistant to vibration resistance compared to the
bulb.
Engine Revolution Indicator Light
This speedometer is equipped the engine revolution indicator light. The engine revolution indicator light is adjustable
from 7 000 – 16 000 r/min. (from 7 000 r/min to 10 000 r/min, every 250 r/min and 10 000 r/min to 16 000 r/min, every
50 r/min: Initial setting: 13 000 r/min)
9
7
10
11
8
6
3
12
12
2
1
13
14
15
16
5
17
4
SEL
I837H1930001-03
1. ADJ button 10. LED (FI indicator light / Oil pressure indicator light / Engine coolant temperature indicator light)
2. Tachometer 11. LCD (Oil pressure indicator / Engine coolant temperature indicator)
3. LCD (Speedometer) 12. LED (Turn signal indicator light)
4. LCD (Engine RPM indicator) 13. LED (Neutral indicator light)
5. SEL button 14. LED (Fuel indicator light)
6. LCD (Odo / Trip 1 / Trip 2 / Fuel reserve’s trip / Clock /
Adjustment of brightness of lighting)
15. LED (Immobilizer indicator light) (For E-02, 19, 24)
7. LED (Engine RPM indicator light) 16. LED (High-beam indicator light)
8. LCD (Engine coolant temperature / FI / Sd) 17. LCD (Gear position indicator)
9. LCD (Drive mode indicator)