2B-11 Front Suspension:
• Apply fork oil to the O-ring.
CAUTION
!
Use a new O-ring to prevent oil leakage.
: Fork Oil 99000–99001–SS5 (SUZUKI FORK
OIL SS-05 or equivalent)
• Remove the special tools.
• Tighten the front fork cap to the outer tube temporarily.
Front Fork Parts Inspection
B837H12206005
Refer to “Front Fork Disassembly and Assembly
(Page 2B-4)”.
Inner and Outer Tubes
• Inspect the inner tube outer surface and outer tube
inner surface for scratches.
• Inspect the “ANTI-FRICTION” metal surfaces for
scratches.
• If any defects are found, replace them with the new
ones.
CAUTION
!
Do not remove the “ANTI-FRICTION” metals
“A” and “B”.
Fork Spring
Measure the fork spring free length. If it is shorter than
the service limit, replace it with a new one.
Front fork spring free length
Service limit: 260 mm (10.2 in)
Damper Rod
Move the inner rod by hand to examine it for
smoothness.
If any defects are found, replace inner rod/damper rod
(cartridge) with a new one.
(a)
4
2
3
I837H1220039-01
“A”
“B”
I837H1220036-01
I837H1220037-01
I837H1220038-01
To Next Page
Loading...
