Manual Transmission: 5B-5
4) Remove the driveshaft left bearing (4) with the
special tool.
Special tool
(D): 09913–70210 (Bearing installer set)
5) Remove the driveshaft left bearing oil seal (5) from
the retainer using the special tool.
Special tool
(D): 09913–70210 (Bearing installer set)
Transmission Installation
B837H15206003
Install the transmission in the reverse order of removal.
Pay attention to the following points:
Bearing and Oil Seal
CAUTION
!
Replace the removed bearings and oil seals
with new ones.
• Install the driveshaft left bearing dust oil seal (1) with
the special tool.
Special tool
(A): 09913–70210 (Bearing installer set)
• Install the driveshaft left bearing (2) with the special
tool.
NOTE
The stamped mark side of the driveshaft left
bearing faces outside.
Special tool
(A): 09913–70210 (Bearing installer set)
(D)
4
I837H1520012-01
(D)
5
I837H1520013-01
(A)
1
I837H1520014-01
(A)
2
I837H1520015-01
To Next Page
Loading...
