Suzuki GSX-R600 - Rear Turn Signal Light Bulb Replacement; Reflex Reflector Construction

Lighting Systems: 9B-11
Installation
Install the rear turn signal light in the reverse order of
removal. Pay attention to the following point:
• Insert the convex part “A” of the side frame cover to
the hole “B” of the center frame cover.
Rear Turn Signal Light Bulb Replacement
B837H19206016
CAUTION
!
When you touch the bulb with your bare
hands, clean the bulb with a cloth moistened
with alcohol or soap water to prevent
premature bulb failure.
1) Remove the rear turn signal light lens (1).
2) Replace the bulb (2).
3) Reinstall the removed parts.
Reflex Reflector Construction
B837H19206017
“A”
“B”
I837H1920038-01
1
I837H1920039-01
2
I837H1920040-01
(a)
1
2
2
I837H1920047-01
1. Front reflex reflector x 2 pcs. (For E-03, 24, 28, 33) 2. Rear reflex reflector x 2 pcs. (For E-03, 28, 33) : 1.75 N⋅m (0.175 kgf-m, 1.5 lb-ft)