Front Suspension: 2B-12
Specifications
Service Data
B837H12207001
Suspension
Unit: mm (in)
Tightening Torque Specifications
B837H12207002
NOTE
The specified tightening torque is also described in the following.
“Front Fork Components (Page 2B-1)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-9)”.
Item Standard Limit
Front fork stroke 120 (4.7) —
Front fork spring free length 266 (10.5) 260 (10.2)
Front fork oil level (Without spring,
outer tube fully compressed)
110 (4.3) —
Front fork oil type SUZUKI FORK OIL SS-05 or an equivalent fork oil —
Front fork oil capacity (Each leg) 410 ml (13.9/14.4 US/lmp oz) —
Front fork inner tube O.D 41 (1.6) —
Front fork spring adjuster 7 turns in from softest position —
Front fork damping force adjuster
Rebound
1-3/4 turns out from stiffest position —
Compression
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Front fork cap bolt 35 3.5 25.5 )(Page 2B-3)
Front fork lower clamp bolt 23 2.3 16.5 )(Page 2B-3)
Front fork upper clamp bolt 23 2.3 16.5 )(Page 2B-3)
Handlebar clamp bolt 23 2.3 16.5 )(Page 2B-3)
Front fork damper rod bolt 35 3.5 25.5 )(Page 2B-8)
Compression damping force adjuster 18 1.8 13.0 )(Page 2B-8)
Front fork inner rod lock-nut 20 2.0 14.5 )(Page 2B-10)
To Next Page
Loading...
