Suzuki GSX-R600 - Handlebar Removal and Installation

Steering / Handlebar: 6B-2
Handlebar Removal and Installation
B837H16206003
Removal
1) Remove the following parts from the left handlebar.
a) Left handlebar switch box (1)
b) Handlebar balancer (2)
c) Grip rubber (3)
d) Disconnect the clutch cable (4)
e) Clutch lever (5)
2) Remove the following parts from the right handlebar.
a) Right handlebar switch box (6)
b) Handlebar balancer (7)
c) Throttle grip (8)
d) Front brake master cylinder/Front brake lever (9)
CAUTION
!
Do not turn the front brake master cylinder
upside down.
3) Loosen the handlebar clamp bolts (10) and front fork
upper clamp bolts (11).
4) Remove the steering stem head nut (12) and washer
(13).
5) Remove the steering stem upper bracket assembly
(14).
NOTE
Place a rag under the steering stem upper
bracket to prevent scratching the body
cowling and the combination meter.
6) Remove the handlebars (15) upward.
1
2
3
5
4
I837H1620001-01
6
7
8
9
I837H1620002-01
11
11
10
10
I837H1620003-02
12
13
14
I837H1620004-01
15
I837H1620005-01