Suzuki GSX-R600 - Page 572

5C-8 Clutch:
7) Install the clutch lifter drive cam (8).
8) Install the clutch sleeve hub (9), washer (10) and
spring washer (11).
NOTE
The conical curve side of spring washer (11)
faces outside.
9) Hold the clutch sleeve hub with the special tool.
Special tool
(A): 09920–53740 (Clutch sleeve hub
holder)
10) Tighten the clutch sleeve hub nut to the specified
torque.
Tightening torque
Clutch sleeve hub nut (a): 95 N·m (9.5 kgf-m,
68.7 lb-ft)
11) Lock the clutch sleeve hub nut with a center punch.
12) Install the clutch push rod (12) into the countershaft.
6
7
8
I837H1530020-02
11
10
9
I837H1530021-01
11
10
I837H1530024-02
(A)
(a)
I837H1530022-01
I837H1530023-01
12
I837H1530025-01