3-70 ENGINE
GEAR POSITION SWITCH
• Install the springs 1 and contacts 2.
• Apply the grease to the O-ring and install the gear position
switch.
/ 99000-25010: SUZUKI SUPER GREASE “A”
• Pass through the gear position switch wire harness into the
guide A.
STARTER MOTOR
• Apply the grease to the O-ring.
/ 99000-25010: SUZUKI SUPER GREASE “A”
• Mount the starter motor on the engine.
NOTE:
Install the clamp to the bolt
A
.
To Next Page
Loading...
