5-32 CHASSIS
REASSEMBLY AND REMOUNTING
Reassembly and reinstallation can be performed in the reverse
order of removal and disassembly procedures. However, operate
the work taking care for the following points.
• Press in the upper and lower outer race using the special tool.
% 09941-34513: Bearing/Steering race installer
• Press in the lower inner race 1.
% 09941-74911: Steering bearing installer
• Apply grease to the upper bearing, lower bearing and outer
races prior to installing the steering stem.
% 99000-25010: SUZUKI SUPER GREASE “A”
• Install the upper inner race 2 and dust cover 3.
• Install the handlebar holders and tighten their nuts temporarily.
To Next Page
Loading...
