CHASSIS 5-31
• Remove the handlebar holders by removing the nuts.
• To remove the lower inner race, use a chisel like, plain head
steel rod.
7
* Unless corrosion, damage or other abnormal condition
is found, the bearing race need not be replaced.
* Once the lower inner race has been removed, replace
it with a new one.
• Drive out the steering stem bearing outer races using the spe-
cial tools 1 and a suitable wedge bar 2.
% 09941-54911: Bearing outer race remover 1
INSPECTION
Check the steering stem and steering stem head for any damage.
Check the bearing and race for corrosion, nick or other damage.
To Next Page
Loading...
