6-26 ELECTRICAL SYSTEM
BRAKE LIGHT/TAILLIGHT
BRAKE LIGHT/TAILLIGHT BULB REPLACEMENT
• Remove the lens by removing the screws.
• Push in on the bulb 1, turn it counterclockwise, and pull it out.
&
If you touch the bulb with your bare hands, clean the
bulb with a cloth moistened with alcohol or soapy wa-
ter to prevent premature bulb failure.
• Reassemble the bulb in the reverse order of removal.
Brake light/Taillight: 12 V 21/5 W
TURN SIGNAL LIGHT
TURN SIGNAL LIGHT BULB REPLACEMENT
• Remove the lens by removing the screws.
• Remove the bulb.
&
If you touch the bulb with your bare hands, clean the
bulb with a cloth moistened with alcohol or soapy wa-
ter to prevent premature bulb failure.
• Reassemble the bulb in the reverse order of removal.
&
Do not overtighten the lens fitting screws.
To Next Page
Loading...
