FUEL AND LUBRICATION SYSTEM 4-17
FLOAT HEIGHT ADJUSTMENT
To check the float height, turn the carburetor upside down. Mea-
sure the float height A while the float arm is just contacting the
needle valve using vernier calipers.
%%
%%
% 09900-20102: Vernier calipers
# Float height A : 9.9
±±
±±
± 1.0 mm
• Bend the float arm 1 as necessary to bring the float height A
to the specified level.
• After adjustment, check the float height and the fuel level again.
To Next Page
Loading...
