CHASSIS 5-19
• When remounting the master cylinder onto the handlebars,
align the master cylinder holder’s mating surface A with punch
mark B on the handlebars and tighten the upper clamp bolt
first.
" Master cylinder bolt: 10 N
.
m (1.0 kgf
.
m)
• Install the brake hose union (97-16), tighten the union bolt
to the specified torque.
" Brake hose union bolt: 23 N
.
m (2.3 kgf
.
m)
7
Bleed air from the brake system after reassembling the
master cylinder. (
99
99
92-14)
Master cylinder
Upper
clamp
bolt
Handlebars
Clearance
To Next Page
Loading...
