CHASSIS 5-27
• Apply grease to the lip of the oil seal 3 and install it into the
outer tube using the front fork oil seal installer.
/ 99000-25010: SUZUKI SUPER GREASE “A”
% 09940-52861: Front fork oil seal installer set
7
Wash clean the front fork oil seal installer before using.
If dirt is on the installer, the inner tube may possibly be
damaged during press-fitting work.
• Fit the stopper ring 2 and dust seal 1.
7
Make sure that the stopper ring is securely fitted into the
groove on the outer tube.
• Fit the rebound spring 7 on the damper rod 6 and install them
together to the inner tube.
• Apply the thread lock to the damper rod bolt 9.
• With the damper rod held immovable, with the gasket 8 fitted,
tighten the damper rod bolt 9.
" Damper rod bolt: 30 N
.
m (3.0 kgf
.
m)
: 99000-32110: THREAD LOCK “1322”
% 09940-34520: “T” handle A
09940-34581: Attachment B
7
Replace the gasket with a new one.
1 Dust seal
2 Oil seal stopper ring
3 Oil seal
4 Oil seal retainer
5 Slide metal
To Next Page
Loading...
