Suzuki VL125 - Page 44

ENGINE 3-9
ENGINE SPOCKET
• Loosen the rear axle nut, rear torque link nuts and chain ad-
justers.
• Install the engine sprocket.
• Tighten the engine sprocket nut 1 to the specified torque.
" Engine sprocket nut: 90 N
.
m (9.0 kgf
.
m)
NOTE:
When tightening the engine sprocket nut, depress the rear brake
pedal.
• Bend the lock washer securely.
• Tighten the left footrest bolts to the specified torque.
" Footrest bolt: 23 N
.
m (2.3 kgf
.
m)
• Install the gearshift arm and adjust the gearshift lever hight.
(92-10)
• Connect each electric part and its couplers. (97-10 – 12)