ENGINE 3-17
PRIMARY DRIVE GEAR
• With the generator rotor held immovable using special tool, re-
move the primary drive gear nut.
! 09930-44530: Rotor holder
"
This bolt has left-hand thread. Turning it counterclock-
wise, it may cause damage.
• Remove the key 1, cam chain 2 and cam chain drive sprocket
3.
• Remove the cam chain tensioner 4.
OIL PUMP
• Remove the circlip 1 and oil pump drive gear.
! 09900-06107: Snap ring pliers
• Remove the pin 2 and the washer 3.
• Remove the oil pump 4.
SPEED ROTOR
• Remove the circlip 5 and speed rotor.
! 09900-06107: Snap ring pliers
Loosening
direction
Loosening
direction
To Next Page
Loading...
