Svantek SV 104A User Manual

SV 104A USER'S MANUAL_______________________________________________________
20
- change the VIEW
3
mode with the <ENTER> key
- select the required ACOUSTIC PROFILE
4
with the <PROFILE> key
- and SCROLL through the results with the <SCROLL> key
Note: To save power consumption and extend battery life SV 104A will automatically switch off
the display after 30 seconds if no button on the keypad is pressed. The LED indicator will still inform the user
about the current state of operation and any possible alarm conditions. Press any key, to reactivate the display.
3.7.1 Primary key functions
On the front panel of the instrument the following control push-buttons are located. See below for primary
(short press) key functions description:
Figure 3-7 Control keypad on the front panel – primary key functions
3
See chapter 3.9 about VIEW modes
4
See chapter 3.8 about “3in1” functionality (3 independent acoustic profiles)
<PROFILE> key
change presented
ACOUSTIC PROFILE,
1, 2, 3, 1, etc.
<SCROLL> key
scroll down thru
RESULTS
<ENTER> key
Change VIEW mode
(see chapter 3.9)
ACOUSTIC PROFILE
number and status bar
RESULTS

Svantek SV 104A Specifications

General

Brand	Svantek
Model	SV 104A
Category	Measuring Instruments
Language	English