SV 104A USER'S MANUAL_______________________________________________________
28
3.10 ALARM screen review
Apart from simple LED alarm indications (see chapter 3.5) there are a few alarm conditions, when
ALARM presentation screens will appear. During a measurement run the SV 104A will immediately turn on
the display at the time that the programmable alarm condition is exceeded. The detailed alarm state condition
for each profile is presented to the user. Press any key, to confirm the information.
Figure 3-19 ALARM view screens
Note: At any time when battery power is almost exhausted the “low battery” alarm screen may
inform you about immediate recharging requirement.
To Next Page
Loading...
Need help?
General
