SV 104A USER'S MANUAL_______________________________________________________
3
GENERAL WARNINGS, SAFETY CLAUSES, AND STANDARD INFORMATION
Note: The SV 104A dosimeter contains no user serviceable parts. Opening product case
invalidates the warranty.
Note: When in normal use, always fit the SA 122A windshield provided.
Note: Battery power indicator - To improve accuracy of remaining battery life indicator, run
the dosimeter until it is fully discharged; then proceed with a full charge via the micro USB port. The procedure
is recommended before first use. Repeat this procedure every few months of use to maintain more accurate
current battery condition indication.
Note: On account of continuous product improvement SVANTEK reserves the right to make
changes to product specifications without notice. To download the most up to date user's manual please visit
our web site at www.svantek.com.
This user’s manual presents the firmware revision named 1.02.1 (see the Unit Label review chapter 4.5
to check version details).
This user’s manual presents some aspects of Supervisor software revision named 1.8.10 and Assistant
application for mobile devices 2.1.19 (see the software start-up splash screen).
The succeeding software revisions (marked with the higher numbers) can change the view of some displays
presented in the text of the manual.
Notice: Dosimeter incorporates Bluetooth
®
wireless communication operating in 2.4GHz RF band and
transmit power up to +9dBm.
Notice: For air-transport turn off Bluetooth interface (see chapter 3.7.3, 6.5.7.4 and 4.6).
WEEE Notice: Do not throw the device away with the unsorted municipal waste at the end
of its life. Instead, hand it in at an official collection point for recycling. By doing this you will help to preserve
the environment.
To Next Page
Loading...
Need help?
General
