Recording
Recording Playing discs EditingBefore you start Connections Getting started
Changing the
Setup menu Others Español
If you are using a DVD-RW disc, by
default it will be Video mode. You
can change it to VR mode from the
Setup menu.
1
Press [SETUP].
2
Using [K / L], select “Disc”.
Press [ENTER].
Disc menu will appear.
3
Using [K / L], select “Format”.
Press [ENTER].
Format menu will appear.
4
Using [K / L], select “Start”.
Press [ENTER].
Final confirmation window will
appear.
5
Using [K / L], select “Yes”.
Press [ENTER].
Formatting will start.
6
Formatting is completed.
“100%” will be indicated.
Reformatting a disc
Note
• When you reformat the disc,
the contents of the disc will
be erased.
• If you want to cancel format at
step 4 or 5, select “No”.
You can set a specified time for
chapter marks.
1
Press [SETUP].
2
Using [K / L], select
“Recording”. Press [ENTER].
3
Using [K / L], select “Auto
Chapter”. Press [ENTER].
Option window will appear.
“10 minutes” has been selected as
the default.
4
Using [K / L], select a desired
time option. Press [ENTER].
5
Press [SETUP] to exit.
Setting for Auto Chapter
To Next Page
Loading...
