You can program the unit to record
up to 8 programs within a month in
advance. Daily or weekly program
recordings are also available.
• Be sure to set the clock before
setting a timer programming.
• Insert a recordable disc.
1
Press [TIMER PROG.].
Timer Programming list will appear.
2
Using [K / L], select a program
number. Press [ENTER].
3
Using [K / L], enter the Date.
Press [B].
4
Using [K / L], enter the Start
and End. Press [B].
5
Using [K / L], select the channel
number to record. Press [B].
To record from external input,
select L1 or L2.
6
Using [K / L], select a recording
speed.
Refer to “Recording speed” on
page 24.
Note
• If you have not set the clock
yet:
A manual clock setting menu
will appear instead of the
Timer Programming list at
step 1. Continue with step 2
in “Manual Clock Setting” on
page 22 before setting a timer
programming.
• Press
[s / B] to move the
cursor to the left and the right in
the Timer Programming list.
• After step 8, the recording will
start immediately before the
recording time you set.
1
2
3
4
5
6