You can delete a specific part of
a title.
Even when parts of title are
deleted from the Playlist, the
original title will remain as it is.
The disc space to record will not
be increased.
1
Press [TOP MENU], and then
press [MENU / LIST] to select
“Original” or “Playlist”.
2
Using [K / L / { / B], select the
desired title. Press [ENTER].
Option window will appear.
3
Using [K / L], select “Edit”.
Press [ENTER].
Original or Playlist menu will appear.
4
Using [K / L], select “Scene
Delete”. Press [ENTER].
Option window will appear.
5
Use [SKIP H / G], [REV E],
[FWD D], [PLAY B] and
[PAUSE F] to decide the start
point, then press [ENTER].
Then use [SKIP H / G],
[REV E], [FWD D], [PLAY B]
and [PAUSE F] again to move
to the end point, and press
[ENTER].
A cursor will move to “Preview”.
The bar at the bottom of the
screen indicates the total and the
elapsed time of the title, and the
area selected for deletion will be
indicated in red.
Press [ENTER] again to start
the preview.
You can check the result of
deletion by “Preview”.
6
Using [K / L], select “Delete”.
Press [ENTER].
Confirmation window will appear.
7
Using [K / L], select “Yes”.
Press [ENTER].
After that, “Are you sure?” will
appear, so that select “Yes” with
[K / L] and then press [ENTER].
Part of a title will be deleted.
8
After this operation is com-
pleted, press [RETURN ] and
then [RETURN ] or [STOP C]
to exit.
Data will be written onto the disc
momentarily.
Editing
Recording Playing discs EditingBefore you start Connections Getting started Others Español
Changing the
Setup menu
Deleting parts of titles
Note
• Original titles once edited
will not remain as recorded
originally. When you want to
leave the original as it is, edit
the Playlist as you prefer.
• You cannot select “Scene
Delete” when the number of
chapter markers is more than
900.
To Next Page
Loading...
