Editing
Recording Playing discs EditingBefore you start Connections Getting started
Changing the
Setup menu Others Español
Setting or clearing chapter markers
You can put chapter markers
in each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can set chapter markers at
a specified time you selected for
titles with more than 5 minutes.
1
Follow steps 1 to 3 on page 51 to
display the Edit menu.
Using [K / L], select “Chapter
Mark”. Press [ENTER].
Option window will appear.
2
Using [K / L], select a desired
time period. Press [ENTER].
Confirmation window will appear.
3
Using [K / L], select “Yes”.
Press [ENTER].
The marker will be added or deleting.
4
After this operation is com-
pleted, press [RETURN ] and
then [RETURN ] or [STOP C]
to exit.
Data will be written onto the disc
momentarily.
Editing discs in Video mode (cont’d)
This operation may take a
while to be completed.
Note
• You cannot select a chapter
mark interval that exceeds
the length of a title.
• The interval of chapter marks
may be slightly longer or
shorter than the one specified
at step 2.