Sym PA12B - Camshaft

To this chapter contents
7. Cylinder Head / Valve
Camshaft
Rocker arm and camshaft puller
Camshaft Removal
7-6
Screw in a 5mm bolt or use the Rocker arm
and camshaft puller to pull out the rocker
arm and the camshaft.
Special tool：
Rocker arm and camshaft puller
SYM-1445100
Camshaft Inspection
Check the camshaft for any wearing or loosen,
also the bearing on the camshaft.
Service Limit：Intake 30.8mm
Exhaust 30.02m
Valve Rocker Arm
Rocker arm Disassembly
Disassemble the Rocker arm shaft holding
plate (bolt×1)
Use Rocker arm / camshaft puller to pull out
the rocker arm shaft.
Special tool：
Rocker arm and camshaft puller
SYM-1445100
Bolt ×1
Rocker arm and camshaft
puller