To this chapter contents
8. Cylinder / Piston
8-10
Cylinder Installation
Install the dowel pins and the new cylinder
gasket.
Apply clean motor oil to the cylinder bore,
piston and piston rings.
Install the cylinder carefully.
Press the piston rings if necessary.
Note
z Do not push the piston into the cylinder
forcefully because the piston and piston
rings will be damaged.
Install the cam chain guide, dowel pins and
cylinder head gasket.
Install the cylinder head (refer to chapter 7).
Camshaft chain guide
Dowel pins
Dowel pins
To Next Page
Loading...
