Sym PA12B User Manual

To this chapter contents
9. Crankshaft / Crankcase / Transmission / Kick Starter
Tighten crankcase right side screws and
clutch wire holder.
Bolt ×1
Screw ×1
9-15
Torque value：0.8~1.2kgf-m
Coat grease to the new counter shaft oil seal
and assemble the left crankcase.
Install the cam chain.
Install the cam chain tensioner arm (boltx1).
Install the neutral switch.
Bolt ×1
Screw ×1

Sym PA12B Specifications

General

Brand	Sym
Model	PA12B
Category	Motorcycle
Language	English