To this chapter contents
11. Steering / Front Wheel / Front Fork
Remove the left handlebar switch (screwx2).
11-10
Loosen the clutch cable locknut and
adjustment nut.
Remove the clutch lever pivot bolt.
Remove the clutch lever and clutch cable.
Loosen the clutch lever bracket (boltx1).
Remove the handlebar position bolt cap and
cushion top cap.
Remove the handlebar position bolt.
Loosen the handlebar lock bolt.
Remove the left / right handlebar.
Installation
Install in the reserve order of removal.
Torque value：
Handlebar bolt 3.0~3.5kgf-m
After the handlebar is installed, confirm and
adjust：
y throttle grip operation and free play
y meter, electrical parts operation
Bolt×2
Cushion cap
Bolt×1
Screw×2
Bolt ca
Bolt×2
To Next Page
Loading...
Need help?
General
