CB3000 Client Bridge User Guide
3-6
• Specify the channel to use – Enables you to select a channel approved for your operating
region and country.
• Country/Region – All countries have their own regulatory restrictions concerning electromagnetic
emissions and the maximum RF signal strength that can be transmitted. Select the appropriate
operating region/country.
• Data Rate – See step 4 for more details on configuring the data rate.
Note The CB3000 must already be configured to run in ad hoc mode in order to set
data rates. If the unit is configured for infrastructure mode, the Data Rate button is
disabled.
4. To set data rates for the ad hoc configured CB3000, click the Data Rate button. The Set Data Rates
screen displays.
To Next Page
Loading...
