CB3000 Client Bridge User Guide
5-10
b. If the target firmware file resides within a directory (once downloaded from the Web site), specify
a complete path for the file within the File path field.
c. Select either the FTP or TFTP server radio button, as required, to define whether the firmware file
resides on a FTP or TFTP server.
d. Set the following parameters:
•
IP Address – IP address for the FTP or TFTP server.
•
Username (for FTP server only) – Username to log into the server.
•
Password (for FTP server only) – Password associated with the username.
e. Continue with step 7.
6. If loading the firmware file from a locally stored file (getting firmware file from HTTP), click the Browse
button to navigate to the locally stored firmware update file. Continue with step 7.
7. Click the Upgrade button to initiate the update. Upon confirming the firmware update, the CB3000
reboots and completes the update.
8. Confirm the CB3000’s configuration is the same as before the firmware update.
If they are not, import the configuration file saved prior to performing the update (step 1). See Importing
or Exporting the Configuration File for more details.
Warning! Please wait 10 seconds before resetting the CB3000 after changing
its configuration to avoid a disruption of operation and possible device hang.
To Next Page
Loading...
