Chapter 11 Scanner Emulation Interface
Introduction
This chapter describes how to set up the digital scanner with a Scanner Emulation host. In this mode, the digital
scanner connects to an external decoder or to a decoder integrated in a mobile computer or Point-of-Sale (POS)
terminal.
Throughout the programming bar code menus, asterisks (
*) indicate default values.
*Parameter Process
and Pass-Through
Feature/Option
* Indicates Default
NOTE Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the
screen, be sure to set the document magnification to a level where you can see the bar code clearly, and
bars and/or spaces do not merge.
To Next Page
Loading...
