Scanner Emulation Interface 11 - 11
Leading Margin (continued)
Check For Decode LED
The attached decoder normally asserts the Decode line to signal to the Scanner Emulation host to indicate that it
successfully decoded the transmitted bar code. Some decoders, however, do not assert the Decode signal. In this
case, the digital scanner emits transmit error beeps to indicate that the bar code did not successfully transmit. Scan
the Ignore Decode LED bar code to disable the Transmit Error beeps.
5 ms Leading Margin
10 ms Leading Margin
*Check For Decode LED
Ignore Decode LED
To Next Page
Loading...
