Symbol DIGITAL DS6708 - QR Code; QR Inverse

13 - 74 Symbol DS6708 Digital Scanner Product Reference Guide
QR Code
Parameter # F0h,25h
To enable or disable QR Code, scan the appropriate bar code below.
QR Inverse
Parameter # F1h 4Bh
This parameter sets the QR inverse decoder setting. Options are:
• Regular Only - the scanner decodes regular QR bar codes only.
• Inverse Only - the scanner decodes inverse QR bar codes only.
• Inverse Autodetect - the scanner decodes both regular and inverse QR bar codes.
*Enable QR Code
(01h)
Disable QR Code
(00h)
*Regular
(00h)
Inverse Only
(01h)
Inverse Autodetect
(02h)