Front Panel Command Line Interface
To select Input A
Press Input A button
To select Input B
Press Input B button
To arm the selected input:
Press the Auto button
To select input A enter:
switch [<[A|B]>]<CR> // Set switch position.
To select input B enter:
switch [<[A|B]>] [<auto>] <CR> // Set switch position. and auto
switching. Note: either switch A or switch B have to be designated
when using the auto parameter.
To read which input is selected enter:
switch <CR>
How to Get or Set the System Clock
Front Panel Command Line Interface
Not applicable To set system clock. enter:
time [<dd> <Mmm> <yyyy> <hh:mm:ss>] <CR>
To read the time enter:
time <CR>
Example returned time:
Tue Jan 10 07:59:59 2012
How to Get, Set or Clear the System Password
Front Panel Command Line Interface
To disable the password,
press the ALARM button down
for at least ten seconds.
To set the system password enter:
password <Set|Clear> [<string[a-z|A-Z|0-9]>] <CR>
// set/clear system pwd // System password must be between 1
and 8 characters long.
For example enter:
password set symm
password updated (is read back)
For example enter:
password clear
Password has been cleared. WARNING:
THISSYSTEMISNOWUNSECURE.
9611B_UserGuide_RevA.pdf.......................................................................... Page 29
To Next Page
Loading...
Need help?
General