radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Oper-
ation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Modifications not expressly approved by the manufacturer could void the user's
authority to operate the equipment under FCC rules.
Restriction of Hazardous Substances (RoHS)
2002/95/EEC Restriction of Hazardous Substances in Electrical and Electronic Equipment
Contains lead in solder per Annex exemption 7 for telecommunications infrastructure equipment.
Environmental Specifications
Operating Temperature 0 C to +50 C
Storage Temperature -40 C to +70 C
Humidity
Operating 10% to 90% non-condensing
Non-operating 5% to 95%
Altitude
Operating 0 to 5,000 feet
Ordinaryprotection:
This unit is for indoor use only. It is not sealed to prevent moisture from entering the enclosure.
PollutionDegree
2 per EN60950-1
Installation(Over-Voltage)
Category II for transient over-voltages per EN 60950-1
9611B_UserGuide_RevA.pdf.......................................................................... Page 41
To Next Page
Loading...
Need help?
General