EasyManua.ls Logo

Symmetricom SyncServer S100 - Appendix C; Antenna Replacement; Appendix E

Symmetricom SyncServer S100
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
S100 User Guide – Rev. D – June 2005 141
2
5
3
Appendix E
Antenna Replacement
Please note that the GPS antenna equipment described in this manual has been superseded
by the following Standard Antenna Kit, consisting of:
One wide-range 5-12 VDC L1 antenna
One 50 ft. length of Belden 9104 coaxial cable with BNC(m) and TNC(m) connectors
Adaptors are included for GPS receivers that have a non-BNC antenna connector
The Antenna Kit can be ordered with optional cable lengths and accessories. Please note the
following when setting up longer cable runs:
Using Belden 9104, the maximum cable length without amplification is 150 feet
Using Belden 9104, the maximum cable length using the optional in-line amplifier is 300
feet
For cable runs longer than 300 feet, an optional GPS Down/Up Converter kit is available
Other GPS Antenna Options:
A Lightning Arrestor kit
A 1:2 splitter (distributes the signal from a single antenna to two GPS receivers)

Table of Contents

Related product manuals