S100 User Guide – Rev. D – June 2005 61
2
5
3
NTP Restart
Here, you can restart the NTP daemon, for troubleshooting purposes only.
However, please note the following warning:
NTP Status
This screen gives you the following information:
Reference Time - This is the last time it synced.
System Peer - This tells you which NTP server the S100 is synced to.
System Peer Mode - This tells you what the S100 is—client or otherwise—to the NTP server
it is synced to.
Warning!
It can take NTP a significant
period of time to go through its
processes. If you choose to
restart, you will be required to
reset your time source.
Figure 4-8: Restart NTP
Figure 4-9: Snapshot of NTP Status
To Next Page
Loading...
Need help?
General
