42 S100 User Guide – Rev. D – June 2005
SyncServer S100
NTP
You can also acquire time through other NTP servers and S100s.
Note: If you have not configured DNS, use IP addresses rather than hostnames.
Choose the NTP radio button (see Figure 3-16) and click Next.
The Network Time Protocol Settings dialog (Figure 3-29
) appears. On this screen, name
one (or more) NTP servers or peers.
NTP v4’s Autokey requires digitally signed certificates. For more about the Autokey protocol,
see “S100 and NTP v4’s Security Features” on page 10
.
Then click Next.
Figure 3-29: Defining Your NTP Settings
ntp1.symmetricom.com
To Next Page
Loading...
