S100 User Guide – Rev. D – June 2005 49
2
5
3
Using SymmTime™
Next, you need to install client software to test NTP (Windows installation).
The SymmTime utility is a handy way of doing this. It keeps accurate time on your client
Windows computer.
Use SymmTime200x.exe to launch SymmTime on your PC. When executed from the CD-
ROM, a small pop-up containing four clocks appears. Once installed, visit
http://www.ntp-
systems.com/symmtime.asp and download the latest updated files.
Installing SymmTime
1. On the client computer’s hard drive, create a separate directory for SymmTime.
2. Copy the
SymmTime200x.exe file from the utility disk into this directory.
3. Double-click
Symmtime.exe. This will install the program onto your computer.
4. Configure the clocks as you desire using the Build tool (select the hammer in the lower
right corner, the following appears).
Figure 3-39: SymmTime™ Utility and Clock Display
To Next Page
Loading...
