SA160
AIRCRAFTA I R C R A F T
Symphony
AIRCRAFT
(a) If the tuning cursor is not currently in the desired window (COM or
VLOC),pressthesmallleftknob momentarily.
(b) Rotate the large left knob to select the desired megahertz (MHz)
value.
(c) Rotate the small left knob to select the desired kilohertz (kHz)
value.
(d)To activate the selected frequency, press the corresponding flip-flop
key for COM frequencies or for VLOC frequencies.
4.2 FREQUENCY SELECTION
4.3 DATA ENTRY
(a) Data is entered in the GPS window using the large and small
right knobs. The large right knob is used to move the
cursor about the page. The small right knob is used to select
individualcharactersforthehighlightedcursorlocation.
4.4 PAGE SELECTION
(a) Selection of any main page is performed using the large and
small right knobs. The large right knob selects the page
group: NAV, WPT or AUX. The small right knob selects the
desired page within a group. To quickly select the default NAV page,
pressandhold .
Feb 25, 2005
9of16
To Next Page
Loading...