AIRCRAFT
SA160
AIRCRAFTA I R C R A F T
Symphony
2.4 INSTRUMENT APPROACH
4of15
SECTION 9
SUPPLEMENT 2
Instrument approach navigation predicated upon the GNC 420's GPS
Receiver must be accomplished in accordance with approved instrument
approach procedures that are retrieved from the GPS equipment data
base. The GPS equipment database must incorporate the current update
cycle.
(a) Instrument approaches utilizing the GPS receiver must be conducted
in the approach mode and Receiver Autonomous Integrity
Monitoring(RAIM)mustbeavailableattheFinalApproach Fix.
(b) Accomplishment of ILS, LOC, LOC-BC, LDA, SDF, MLS or any others
type of approach not approved for GPS overlay with the GNC 420's
GPSreveiverisnotauthorized.
Feb 25, 2005
The Main software version is displayed on the GNC 420 self test page
immediately after turn-on for 5 seconds. The remaining system software
versions can be verified on the AUX group sub-page 2,
“SOFTWARE/DATABASE VER”
2.3 ENROUTE NAVIGATION
IFR enroute and terminal navigation predicated upon the GNC 420's
GPS Receiver is prohibited unless the pilot verifies the currency of the
data base or verifies each selected waypoint for accuracy by reference
to current approved data.
To Next Page
Loading...