SA160
AIRCRAFTA I R C R A F T
Symphony
AIRCRAFT
mixture condition. Allow the engine time to stabilize (i.e, engine
tempsandpressures,etc.).
- Press 'BUTTON 3'. The 'Autotrack' indicator will activate
in the display and the system will begin tracking the engine's
performance from this point.
The “Autotrack” system is now armed and watching for engine deviation
from the point you picked. To cancel, simply press 'BUTTON 3' again to
extinguishthe “Autotrack” indicator. Re-arm again at any time.
NOTE
Any important alert condition, (i.e., low fuel pressure, high CHT, etc.)
automaticallycancels“'Autotrack” mode.
If any engine parameter deviates beyond the initial set point, the system
will flash the corresponding graphic display and the “AUTOTRACK”
indicator.
If the deviation is large enough, a graphic pointer (circular sweep
displays only) will show where the parameter was before the deviation
occurred. This gives you a chance to evaluate the magnitude of the
deviationandtakethe appropriate action.
To shut off the alert condition, return the parameter to its previous value
(example: adjusting manifold pressure due to a climb) or simply press
'BUTTON3'toshutoffthe'AUTOTRACK'system.
If optionally equipped, an audible and visual alert will activate in the
EC100cautionadvisory system.
STEP 2
“Autotrack” ALERT INDICATIONS:
Feb 25, 2005
17 of 27
To Next Page
Loading...