Syntec 22/220 Series User Manual

机床产品/Machine Tool Products
              –
              22/220 Series Controller Application Manual
Software Installation、Data Backup/Restore–59
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
13 Software Installation、Data Backup/Restore
Software Installation
Path
Eight Key: F10 Next →F4 System Admin. → F1 Install Software
FiveKey: F10 Next → F4 System Admin.→ F1InstallSoftware
Function
This function key is used for controller software upgrade.
Software upgrade package is a compressed zip file download from the Syntec website. It requires a
Syntec website account to download.
It's able to install the upgrade file with USB drive or network share folder, USB drive method is more
commonly used.
Operation
Download the upgrade package and copy the file to USB flash drive or network share folder.
Press "Install Software (F1)", a window will pop-up.Use the arrow keys to select "USB Flash Drive" or
"Network Share Folder" then press "Enter" key.
Use arrow keys to move the cursor onto the installation package, package information will be shown
under the window after a few seconds.
Once confirmed the information, press "Ok".
Regular Controller Operation: A question window will show up after a while, press "Ok" again to start
the copy.
Dipole Operation:
Versions 10.116.24V, 10.116.36B, 10.116.37,10.117.37 and before (included)
Compare the installation package information with the backgroundController.If
matched, a question window will show to ask whether to install in the background,
press "Ok" key.
Versions 10.116.24V, 10.116.36B, 10.116.37,10.117.37 and above (not included)
First compare install package information with front stageController.If matches, a
question window will show toask whether to install in front stage, then press "Ok" key.
Then compare the install package information with backgroundController.If
matches,then you will be asked whether to install in the background, then press "Ok".
<exception> Handheld Teach Pendant installation package and EHMI installation
package will only be installed at the front stage.
After the controller finishes copying, a window willremind the users to reboot and continue the
installation process.
Select the software upgrade package

Syntec 22/220 Series Specifications

General

Brand	Syntec
Model	22/220 Series
Category	Controller
Language	English