Tait TP9100 - Page 216

216 Frequency Synthesizer Fault Finding TP9100 Service Manual
© Tait Electronics Limited May 2005
8. Confirm the removal of the fault, and go to Step 9. If the repair
failed, replace the main board and go to “Final Tasks” on page 134.
9. Replace all cans.
10. Repeat Tas k 40
to confirm the removal of the fault. If the repair
failed, replace the main board and go to “Final Tasks” on page 134.
Figure 9.22 Synthesizer components under the CDC TOP can (top side)