If an acknowledgement is not received from the recipient’s radio, you will have the option of either canceling or resend-
ing the request.
Radio Check
Notice This feature is only available on P25 conventional channels.
If you want to find out whether a particular radio is available on the system, you can use the radio check feature. This
sends a radio check message to the radio unit you have specified.
1. Press Menu and select Services > Radio check.
2. Scroll to the radio you want to check.
3. Press Send to.
The LED glows red and a message showing the destination appears in the display.
If the radio is available on the system, an acknowledgement message is displayed.
If an acknowledgement is not received from the recipient’s radio, you will have the option of either canceling or resend-
ing the request.
Radio Inhibit and Uninhibit
When a radio is immobilized (‘inhibited’), the encryption keys may be automatically
deleted from the radio.
This feature is only available for digital channels operating in conventional mode, and for radios configured for dis-
patcher operation.
If you want to make another radio on the system inoperable, you can use the radio inhibit feature. This feature is also
known as ‘stun’.
To the user of the inhibited radio, it appears as though the radio has turned off. The radio remains inoperable even if it
is turned off and then on again.
The radio cannot return to operation until it receives an uninhibit request. This is also known as ‘revive’.
To send a radio inhibit request:
1. Press Menu and select Services > Radio inhibit.
2. Scroll to the desired radio to make it inoperable.
3. Press Send to.
66
Tait International Ltd July 2021
To Next Page
Loading...
Need help?
General
